FUJIFILM Corporation (President: Kenji Sukeno) is delighted to announce that the FUJINON 4K Cine Zoom Lenses providing imagery in television have been awarded a 69th Engineering Emmy® Award by the Television Academy*.

• ON1 Photo RAW 2018 is coming at the end of October for $120 (public beta on October 6). Nothing Fujifilm specific, but HDR, Pano, Masking, and more. Details at petapixel. Also, check out on1.com for a live event
• Video: Editing a Fuji Raw file in Luminar via X-Transformer at thomasfitzgeraldphotography. Check out Luminar Neptune!

Michael Schnabl
Fuji X-T2 with XF 56mm
F/4.0 – 1/125 – 200ISO
Photo: Michael Schnabl
Model: Nastassja
Make up: Yasmin Sulzberger — at Fotopraxis-Fotoworkshops

_ _ _

Push READ MORE to Enjoy More Stunning Fuji shots :)

GUEST POST FEATURE HERE
Write Your Articles Directly On FujiRumors!

INITIAL NOTE by FUJIRUMORS

My Fujifilm X-T1 has the same issues, bending door and rubber coming off. I already fixed it once, and paid for nothing, since the problem persisted. Now that this story is out, I will contact my local Fujifilm support and ask if they can perform the fix again, with the improved material and for free, like they did for All.

In case you have the same issue, contact your local Fujifilm support and direct them to this article on FujiRumors, to make sure you will get a definitive, durable and possibly free fix for you X-T1.

Guest post by All @allebewop instagram.com/allebewop/

It was March 10th, 2017 when I participated a discussion here on Fujirumors about the “Replacing the X-T1 Rubber Grip” issue.

I had my bending door replaced the first time in September 9^th 2015.

I spent 15€ for shipment but I had it replaced for free because my camera was still under warranty (I bought it in March 2014). At that moment X-T2 wasn’t on the market and when the camera came back I knew that the grip was just the same as it was out of the box. No surprises there.

As the grip was the same, the next summer I had the same problem as the summer before: with the heat, the USB door bended again. It was making me mad. I tried everything, from the duct tape to the reverse bending after heating up the rubber with a hairdryer. Nothing worked.

This time the problem affected all the grip and it was starting to unstuck in several points: the from the handling, from the MCS selector in the front and near the back/disp button.

I was really upset so I decided to send the camera back in after the summer.

It was February 8^th 2017 when I sent my camera to the repair center.

This time the camera’s warranty was expired so I was expecting to pay from 50€ to 150€ for the service, as it was told me by the local seller I asked to.

But here comes the surprise.