And after the Fujifilm EF-X500 delay (report here), we now have another very nice flash for the Fuji X-system, that has been postponed: the Nissin i60!

It was originally planed to hit the market in mid June (report here), but has now been postponed to late July, according to BHphoto. But maybe that’s a bit too optimisitc. Nissin officially said the Sony Version will be available in August (via SonyAlphaRumors).

Product Highlights

• Nissin Air 2.4 GHz Radio TTL System
• Compatible with Fujifilm TTL
• Guide Number: 197′ at ISO 100 and 200mm
• Zoom Range: 24-200mm (16mm with Panel)
• LED Video Light; Color LCD Screen
• Tilts Upward 90°
• Rotates Left & Right 180°
• Recycle Time: 0.1-5.5 Seconds
• Slow, High-Speed, 1st & 2nd Curtain Sync
• Runs on 4 AA Batteries or External Pack

_ _ _

I’ve already told you about it last month with this rumor: the EF-X500 Flash will be delayed… again!

Sure, it was not just Fuji’s fault. For example, nobody could have predicted the Metz insolvency (who should have produced the Fujifilm branded flash). But for one reason or another, we waited and waited… and it never came.

But back at the X-Pro2 launch in January, Fujifilm was sure: the EF-X500 will hit the market in May 2016.

Well, something went wrong… again… and Fuji just officially said the release has been pushed back again to September 2016. Here is the google translated press release.

PRESS RELEASE
Digital camera “X Series” for accessories

“Clip-on flash EF-X500” release postponed News
May 31, 2016

FUJIFILM Corporation
Customers Dear

Dear Thank you thick continued patronage Fujifilm product.

For “clip-on flash EF-X500” currently in development, but it had been expected to launch around May 2016, because it takes time to develop than originally expected, by the time 2016 September sale I have decided that I am allowed to postpone.

Thank you as you look forward for your understanding.
Record

product name
Clip-on flash EF-X500
Release date
<Initial> 2016 5 released around May
<After change> 2016 September sale time
※ as soon as they are determined with regard to the specific release date, it will guide you at our Web site.

SUPER X SAVINGS :: Pay only $499 for the XF14mm :: XF16mmF1.4 now $300 off … and MUCH more!

Billy of the Fuji Guys was interviewed by ArtoftheImage about the X-Pro2. There are a few of Billy’s statements I’d like to highlight.

If you don’t have time to watch the entire 27 minutes video, then here is the transcription I’ve made for you of the most important parts (you’re welcome ;) ).

1. The X-Pro2 is overengineered
   Billy: “The processor allows us future expansion, when we need to do so. There is a lot of potential still in the X-Pro2 that has not been harnessed yet.”
   Interviewer: “In terms of how Fuji is constantly doing updates via firmware?”
   Billy: “That’s right. Whether it’s the controls or the AF-system”.
   Interviewer: “So you overengineered the X-Pro2, anticipating advancements you are going to offer in firmware down the road”.
   Billy: “That’s right, absolutely”
2. AF speed
   Billy: “Faster contrast detection AF over previous models. Firmware has been fine tuned, but there is still room for growth based on combination of sensor and processor”
3. Kaizen + EVF Refresh rate higher than 85fps? It’s possible!
   Interviewer: “That’s one of the neatest things about Fuji. You buy the camera, and it doesn’t end there. Like 2 years later you get a 50% better camera because you keep giving the consumer updates, whereas other camera manufacturers are like –ok, you bought your camera, we are done with that-”
   Billy: “Well, when you look at Fuji cameras, the design is timeless. The idea is to try to keep the camera as long as possible. Fuji obviously has to balance between how long you keep the camera to when you buy a new camera. Because, at the end of the day, when someone buys a Fuji camera, it really helps keep Fuji in business and gives us the ability to do things we want to do, which is to close the gap between this and a DSLR. We have done that with the Viewfinder [of the X-Pro2], offering extremely fast refresh rate. […] The human eye recognizes the difference in motion about 120 fps. We are actually at 85fps, so very very close. […] And the processing power is actually already there in this camera to eventually even reach 120fps!
   Interviewer: “So you might even tweak that?”
   Billy: “Absolutely! But as I said, it’s also a balance between performance and power. Make 80 shots and have incredible performance or make 200-300 shots and get decent enough performance.”
4. Why no tilt screen?
   Billy: “When you develop a product, there is a path you have to go through. It’s also based on budgets. If you do this, you can’t do that. Or the cost of the product goes up. The idea is to keep the product at a certain price point and follow that.”
5. 4K… why not? And will it come via Firmware Update?
   Billy: “The X-Pro2 is 4K capable. The processing power and sensor is there. The issue is heat. The required heat dissipation is not built into this camera. You can put 4K in, but after 30 seconds or something like that the camera is going to be super-hot and you can’t use it. […] Eventually I assume Fuji will get there [X-T2 anyone ;) ], but the X-Pro2 was designed with photography in mind.”
   Interviewer: “So we can’t expect 4K to come via Firmware update?”
   Billy: “Heat would be an issue. There would be battery issues, too. But you never know… I can’t say never.”

Fujifilm X-Pro2
USA: BHphoto / AmazonUS / Adorama / CANADA: AmazonCA / EUROPE: AmazonDE / AmazonUK / WexUK / PCHstore / AmazonITA / AmazonFR / AmazonESP / AUSTRALIA: CameraPro