IN STOCK: Sigma 12mm f/1.4 DC Contemporary for Fujifilm X
The Sigma 12mm f/1.4 DC Contemporary is now in stock at BHphoto here.
The Sigma 12mm f/1.4 DC Contemporary is now in stock at BHphoto here.

The already highly overcrowded full frame digital camera market might soon get a new competitor: DJI.
In fact, strong rumors shared by DJI-Rumors (via L-rumors) say that on September 15, DJI will launch its first full frame digital mirrorless camera.
If you think that’s nonsense, I remind you that DJI already has a medium format mirrorless camera on the market, the Hasselblad X2D, because Hasselbad is owned by DJI.
Since they make a mirrorless digital cameras already, it’s not impossible that they might soon also offer a full frame mirrorless camera. Plenty of brands have their hands on multiple sensor sizes, so why not DJI too?
The new DJI full frame mirrorless camera will enter a highly overcrowded market, where Sony, Canon, Nikon, Panasonic, Sigma and Leica all have their full frame cameras offerings.
So while all brands will soon scrutinize DJI’s new full frame camera, it is mainly those offering FF cameras who will be most worried about it.
Fujifilm has no full frame camera and so far they have kept their word given to us in 2018: “we will NEVER go Full Frame“.
Sure, Fujifilm will look with interest at the DJI FF camera, but on the other side they are also those less worried about it, as it is not a market they are into.
Fujifilm made a clear choice:
This was Fujifilm’s decision. May it be right or wrong, only time will tell.
But so far it seems Fujifilm is living a rather quiet and relatively successful life outside the overcrowded full frame market and they can look at the DJI full frame with no worries as opposed to other brands, who went all-in with full frame and now have a new and strong competitor coming.
Follow FujiRumors on Patreon, Facebook, Instagram, RSS-feed, Youtube, Flipboard and Twitter
Here are the top 10 articles for August.
Don’t Miss
DxO has just launched DxO PhotoLab 9.
Now all X-Trans cameras can enjoy their most sophisticated DeepPRIME XD3 X-Trans technology.
But there is a lot more, such as AI Masking. All details at the dedicated DxO PhotoLab 9 page.
DxO PureRAW 5.3 is also available now.
The latest versions also add Fujifilm GFX100RF support.
Get DxO here:
Al Mask: for advanced selections
Accelerate your editing with Al-driven subject detection and selection.
Refined Local Adjustments with vastly improved masking system
Enjoy greater flexibility and precision in localized edits with a unified and intuitive masking structure.
Localized Noise Reduction and Lens Sharpness capabilities
Target specific areas for denoising and lens sharpness using masks.
Images stacking in the Filmstrip
Organize your images more efficiently through stackable thumbnails.
Advanced Batch Renaming Tools
Rename images (inputs and outputs) consistently and efficiently using a flexible token-based system.
Support for Apple ProRAW and HEIF/HEIC Image Formats
PhotoLab 9 offers full compatibility with Apple ProRAW and HEIF/HEIC
Enhanced Noise Reduction with DeepPRIME 3 & DeepPRIME XD3 X-Trans
Lens Sharpness Optimization V2
Experience enhanced image detail thanks to the latest improvements in DxO’s lens correction engine.
Quick Access with Favorites
Add folders, projects, or drives to your favorites for quick access. This makes navigating to your most-used destinations faster and more efficient.
U Point feathering control
Diffusion slider has been added to fine tune your masks using U Points.
Projects accessible in Customize tab
In this version you can access your Projects directly from the “Customize” tab. With this improvement, managing and switching between Projects is easier than ever, streamlining your entire workflow.
Known Limitations

Fujifilm GFX100S II ver. 1.20 – download here
The firmware update Ver.1.20 from Ver.1.10 incorporates the following issues:
< Important notice after firmware update >
* After the firmware update, you cannot connect the camera to the iOS version of FUJIFILM Camera Remote. Be sure to upgrade your smartphone or tablet to iOS13 or later and use FUJIFILM XApp instead of Camera Remote.
* After the firmware update, you cannot use the FUJIFILM Camera Remote (Android version) to connect with the camera through Bluetooth: Ver.4.1 and earlier. To pair via Bluetooth, smartphone/tablet must be Bluetooth Ver. 4.2 and latter.
Regarding the details of No.1 download the “GFX100S II New Features Guide[Ver.1.20]” from our website.
GFX 100S II New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic