Skip to content

Fujinon XF150-600mmF5.6-8 and XF18-120mmF4 Compatible with All X Mount Cameras but Some Will Have Restricted Features

Share

Earlier today Fujifilm released firmware updates for ten Fujifilm X and GFX cameras.

The firmware included XF150-600mm f/5.6-8 compatibility for three Fujifilm cameras, the X-T4, X-T3 and X-S10.

This lead to the misunderstanding that the Fujinon XF150-600mm f/5.6-8 will work only with four cameras: the Fujifilm X-H2S, the X-T4, X-T3 and the X-S10.

However, that’s not correct.

The Fujinon XF150-600mm f/5.6-8 will work with all Fujifilm X series cameras. However, except for the four cameras mentioned above, the other cameras will have restrictions on some features and functions. The same is valid also for the brand new Fujinon XF18-120mmF4.

Here is what Fujifilm writes on their compatibility page:

Model Name Firmware version
X-H2S Ver.1.00 or later
X-T4 Ver.1.50 or later
X-T3 Ver.4.30 or later
X-S10 Ver.2.40 or later

* To use XF150-600mmF5.6-8 R LM OIS WR with cameras, update the firmware with the version to support this lens, otherwise some of the functions of this lens will not be available.
* There will be some restrictions on the features and functions with the cameras that are not in the above list.
<Available devices on the lens>
“Zoom Ring”, “Focus Ring”, “Focus Range Selector” and “Aperture Mode Switch”
<Unavailable devices on the lens>
“Focus Selector” (AF-L, PRESET, AF), “Focus Preset Button” and “Focus Control Button” (x4)
<Restrictions>
・While zooming, the focus cannot fully follow the image and the focus is easily blurred.
Note: When the zooming stops, the image quickly comes into focus.

Model Name Firmware version
X-H2S Firmware availability will be published n Sep. 2022
X-T4 Firmware availability will be published n Sep. 2022
X-T3 Firmware availability will be published n Sep. 2022
X-S10 Firmware availability will be published n Sep. 2022

* To use XF18-120mmF4 LM PZ WR with cameras, update the firmware with the version to support this lens, otherwise some of the functions of this lens will not be available.
* There will be some restrictions on the features and functions with the cameras that are not in the above list.
<Available devices on the lens>
“Zoom ring”, “Focus ring”, “Zoom buttons”, “Zoom/focus Control ring” and “Z/F (zoom/focus)button ” .
<Unavailable functions>
The following functions will not be available in the camera’s menu.
“CONSTANT SPEED ZOOM” (8 steps), “CONSTANT SPEED FOCUS” (8 steps), “CONSTANT SPEED ZOOM/FOCUS (Fn) OPERATION”, “START/STOP SWITCH & ACTIVE WHILE PRESSING”, “ZOOM RING ROTATE”, “ZOOM/FOCUS CONTROL RING” and “TOUCH ZOOM” in “TOUCH SCREEN SETTING”
<Restrictions>
・While zooming, the focus cannot fully follow the image and the focus is easily blurred.
Note: When the zooming stops, the image quickly comes into focus.
・Brightness may change discontinuously during zooming (due to aperture movement).

Pre-Orders

Share