Gariz Fujifilm X-Pro3 Leather Half Case and More Affordable Options

The Gariz leather half case for Fujifilm X-Pro3 is available at AmazonUS here and at ebay here.

You can get the Gariz in black here, in brown here and in camel here.

  • Gariz leather half case for Fuji X-Pro3. Made from high quality genuine leather
  • Allow access to battery compartment and ports
  • Unique attachment system, Separate tripod mount
  • Soft inner lining printed with Gariz logo, Supplied in soft carrying bag and presentation box
  • Allows full access to all the Camera functions

If you look for more affordable options, check out:

Fujifilm X-Pro3: BHphoto, AmazonUS, Adorama, FocusCamera

Join FujiRumors on PatreonFacebook, Instagram, RSS-feed, Youtube, Flipboard and Twitter

New Fujifilm Financial Results: Instax Declines, Mirrorless Suffers Severe Market Conditions, Solid Fujifilm GFX100 and X-Pro3 Sales

Last week, Fujifilm published their report for the 3rd quarter of the 2020 fiscal year (October to December 2019 – we remind you that the Japanese fiscal year ends on the 31th of March).

This report confirms the trend we saw in the previous report of November 2019: the Instax hype is slowing down, mirrorless is suffering under severe market conditions, and overall revenue and operating incomings decreased.

But Fujifilm is not alone. As we reported here, recently all camera manufacturers reported loss in their imaging division.

The only positive note comes from the Fujifilm GFX100 and Fujifilm X-Pro3, which enjoyed “solid sales“.

The sales were solid for FUJIFILM GFX100, a mirrorless digital camera equipped with a large format sensor with the world’s highest 102 million pixels resolution, and FUJIFILM X-Pro3, a flagship model of the X series launched in November 2019.

In the Imaging Solutions segment, though revenue decreased compared to the previous fiscal year, and operating income also decreased compared to the previous fiscal year due to such factors as a decline in revenue and effect of exchange rate.

Down below you can see the summary of the report as well as screenshots.

Report Summary

** CLICK HERE to Read the Rest of the Article **

Fujifilm X-Pro3 Titanium Top Plate Issue Explained and Possibly Fixed with 1 Single Press

Over at our Fujifilm X-Pro3 group, there were complaints about the Fujifilm X-Pro3 titanium top plate not sticking perfectly to the body.

You can see for example this post here.

Jonas Rask jumped in, explained the issue in this post, and offered a solution. It’s NOT an official Fujifilm solution. Just something Jonas saw workes, and thought to share.

As the Fujifilm X-Pro3 group is accessible only for facebook members, I will share Jonas text below. However, for the video tutorial by Jonas Rask, check out his post here.

I want to make a comment about the titanium top plate having a gap from the main body construction of the X-Pro3.

This is simply because I have some knowledge on how the camera is made in that regard.

1. The outer shell of titanium is put on top of the weathersealed camera, so any gaps or imperfections will not impede weather sealing as far as I’ve been told. I think that’s quite an important thing to address!

2. The gaps are happening around the small bezelled lens mount ring. As a matter of fact this ring is what is designed to keep the soft titanium in place on the front. The problem is that it seems like the top plate on some cameras isn’t pressed hard enough to latch on to that ring-bezel during final stages of assembly. So what users could easily do is press the titanium down just where the ring is. They will hear a small click, and the Titanium will then be in place.

It’s quite a simple fix. But mind you, this is not an official announcement from Fujifilm. So wether or not you want to do it, is up to you.

But it’s goddamn annoying that it occurs in the first place.

PS: I have seen some images where people put things underneath the gap to show it off in forums. They just made this fix completely impossible for themselves by actually bending the titanium.

It worked for those, who tried it out in the group. If you experience the same issue, try it out, too.

In any case, if it turns out not fixable with Jonas Rask way, there will a recall by Fujifilm. But so far our group members seem to be successful.

Join FujiRumors on PatreonFacebook, Instagram, RSS-feed, Youtube, Flipboard and Twitter

press firmly, you’ll here the click, and the top plate sticks on the body firmly. It was not firmly enough pressed during manufacturing

Photons to Photos Dynamic Range Data: Fujifilm X-Pro3 Beats Fujifilm X-T3 and X-T30 – NOT :)

Photons to Photos added the Fujifilm X-Pro3 to their database, and you can now compare it to all other cameras in their database.

I did compare it to the Fujifilm X-T3 and Fujifilm X-T30, and the Fujifilm X-Pro3, despite having the same processor and sensor, shows a sensible advantage over the X-T3 and X-T30.

So has it better dynamic range?

Bill Claff explains:

The X-Pro3 appears to have improved PDR but it is an illusion.

It’s well known that Fuji implements the ISO setting in an unusual way.
In this case they have given ISO 320 to ISO 12800 an addition 1 stop boost.

Fuji uses a proprietary Exif tag called “Raw Exposure Bias” to indicate how much they have shifted the raw data from “standard”.

Adjusted in Excel for Raw Exposure Bias we see that the X-Pro3 and X-T3 are essentially identical. (They shift to dual conversion gain at a slightly different point).

You can access and manipulate the data here at Photons to Photos. Bill Claff’s comment has been added on dpreview.

Don’t forget to…