But it seems that she added some gear to her Fujifilm collection.
In fact, she has been spotted using a Fujifilm GFX100S for her Rihanna Vogue cover shot.
And to be clear, this post is not meant to say “you need a GFX to create well paid work“. In fact I have seen Annie also using Sony, Phase One and other cameras. Fujifilm is just one of the options she has.
5 years ago Fujifilm’s decision became obvious to all of us: unlike everybody else, we are going to skip full frame, build up the best APS-C system in the known universe and offer as an alternative to full frame a medium format mirrorless system. The result: the Fujifilm GFX system.
And well, the Fujifilm GFX series turns 5 years old today.
I remember at that time lots of skeptical comments, especially by influencers who believe that only full frame matters.
But looking back, I guess much of that skepticism has dissipated by now, given that Fujifilm is now offering medium format mirrorless cameras (GFX100S) that are smaller than some full frame mirrorless cameras (Panasonic S1 series) and offer more megapixel at a more affordable price than some full frame mirrorless cameras (Sony A1).
Sure, all the cameras we mentioned above have other strengths, such as video or speed, but all I want to say is that the Fujifilm GFX series is finding a solid ground on which to flourish.
Steelsring is launching the Steelsring EF/GFX PRO Edition smart autofocus adapter. In addition to the multifunctional button there is also an aperture ring with A/C switch like we find it on Fujinon GF lenses.
FUJI Lens Mode Switch Simulation
FUJIFILM GF lens support mode C (Aperture priority by camera command dial) , mode A (Programming auto mode by camera) and Aperture dial mode.
For Steelsring EF/GF I/II/III adapters, with the help of short click of adapter’s MFB (multi-function button), it is able to simulate the mode switch simulation between C and A modes. initial mode simulation is mode C.
For PRO edition, with the add-on control ring in aperture body, it is possible to simulate an aperture dial too, the mode will cycle in C->A->Aperture Dial for PRO edition via short click of MFB, initial mode simulation for PRO edition is aperture dial instead of C for I/II/III adapters.
Lens mode switch simulation works always, is not relevant to adapter’s working mode as Adapter or GF lens simulation.
About MFB（multi-function button)
Activate firmware update mode for I/II/III and PRO adapters.
Press and hold MFB, then connect to PC/MAC via USB cable, then release the button will enable adapter enter firmware update mode.
When mounted on camera body with lens combination, after camera power on normally
Short click MFB once, will start lens mode switch between C and A for I/II/III adapter, or C->A->Aperture dial for PRO adapter.
Press and hold MFB for 5 secs or longer, then release MFB, will trigger adapter’s mode switch between Adapter mode and GF lens simulation mode, camera body will reboot EF/GFX adapter to be effective immediately.
About Manual Focus Ring (PRO edition only, not available for I/II/III adapters)
When lens mode switch simulation is in C or A mode, aperture control is done via camera body dial, then we use the control ring to simulate a manual focus ring, it is more like power focusing of curtain EF lenses. To be effective, lens body AF/MF mode switch must be set to AF, and camera body focus mode dial set to MF. Turning control ring, it will activate camera’s MF assistant automatically.
About Automatic Focus Bracketing (PRO edition only, not available for I/II/III adapters)
When PRO adapter’s control ring can function as manual focus ring, it is able to set the begin and end positions of auto focusing bracketing depth now. So before entering Auto Focusing bracketing setting in camera body menus, please make sure adapter’s lens mode switch simulation is in C or A mode, and set Lens body AF/MF mode to AF, then turn the adapter’s control ring to set the position accordingly. Please do not turn lens body’s manual focus ring, it is useless because lens won’t report any distance change after focusing position changed, but FUJI’s algorithm need that value.
After finishing automatic focus bracketing positioning setting, control ring can be set to aperture dial simulation again.
I am also working on some other of those questions, and I already have first answers that I won’t share just yet as I want to have it not only twice, but multiple confirmed. I can’t go wrong when I share certain things ;).
But we will talk about all that soon enough.
What I would like from you now, is that you share your top wishes for 2022 in the comments. Anything goes, as long as it has something realistic to it. So for example, wishing for an X-E5 when we just got an X-E4 is not very realistic. Also a big and heavy Fujinon XF600mmF2 probably won’t make much sense, unless you would pay any amount for it and train a lot to be able to carry it around.
Other than that, from cameras to firmware or lenses… whatever your heart desires and wishes, feel free to share it in the comments down below.