Nitecore BlowerBaby and Camera Cleaning Pen, Fuji Guys “In My Bag”, X-T3 Flip Screen Alternatives & More – Accessories Roundup

Share

Nitecore has released the BlowerBaby, which works in conjunction with the Nitecore Camera Cleaning Pen.

The BlowerBaby creates a 70 km/h (43.5 mph) strong wind you can use to blow off dust from your gear and sensor. Moreover, the camera cleaning pen comes with several brushes (a harder one and a very soft one), that you can attach on the BlowerBaby in order to remove the most stubborn dust from your gear.

The Nitecore BlowerBaby & Cleaning Pen is now available at AmazonUS here and also in Europe at AmazonDE and AmazonUK.

  • Strong Wind: Max wind speed of 70 km/h (43.5 mph), which is two times the traditional blower.
  • Wide Range of Usage: Applicable to the cleaning of photographic equipment and more devices, such as cameras and lens.
  • Electric Drive: Built-in 1, 500mAh Li-ion battery provides consistent usage, built-in Li-ion battery charging circuit with a USB-C port, power indicator to indicate the remaining battery power.
  • User-friendly Design: Silicone nozzle to prevent accidental damage to the object surface, constructed from aerospace-grade aluminium alloy with HA- III military grade hard-anodized finish.

Get Yours

Press Releases + Video + Accessories Roundup

BlowerBaby™, the First Electronic Photography Blower in the World is Now Released

BlowerBaby™, the first Electronic Photography Blower in the world is now released, able to produce 70 km/h (43.5 mph) strong wind with a built-in 1,500mAh Li-ion Battery.

We care for the safety of your photographic equipment. As a grand-slam award-winning brand, NITECORE is dedicated to implementing the notion to “Keep Innovating” to reinvent the camera cleaning solutions. From the study of industrial design to the application of the aerodynamics, we are here to challenge the impossible and begin a new era of electronic air blowing.

The 70 km/h (43.5 mph) strong wind is twice of the wind speed of a conventional air blower and equivalent to the Beaufort Wind Force 8 (Gale). The unidirectional air intake prevents secondary damage to the object surface. 2 replaceable filter options are available including the Standard Filter and the Sensor Cleaning Filter.

The built-in 1,500mAh Li-ion battery provides approx. 90 cleaning times. It is USB-C rechargeable, highly efficient with a reversible plug-in. The power indication function is always ready to display the battery level by a simple press.

A one hand operable brush-and-blow cleaning process can be achieved combined with the Camera Cleaning Pen for basic cleaning, lens cleaning and sensor cleaning with an optimized cleaning performance. The user friendly single button Interface is available with dual cleaning modes. In the Fast Cleaning Mode, press and hold to turn on and release to turn off. In the Constant Cleaning Mode, double press to turn on and press again to turn off.

The BlowerBaby™ has a lightweight and rugged construction from aerospace grade aluminum alloy with HA-III military grade hard-anodized finish. With an ergonomic design within your palm, it is ultra compact and portable with a premium silicone nozzle to prevent accidental damage to the object surface.

Accessories Roundup

FR-reader Aalochak contacted me sharing a bunch of solution in case you lose the PC sync terminal cap of your Fujifilm X/GFX camera (as it happened to me a few times ;)).

  1. Service Center – Contact Fujifilm Service Center. If your camera is under warranty they will only charge you for the cap (about 1-2 USD) there will be no service charges.
  2. Buy the Fujifilm CVR-XT4 Cover Kit – it’s definitely expensive and you will get other stuff that you might not need.
  3. 3D print – There are many 3D models available online for free to download and print. It will cost you less than a dollar for about 3 caps. You can play around with colors.
  4. Chinese Websites – you can buy it on AliExpress. They might not look like the original one but gets the work done.
  5. Make the most out of it – you might have a fancy Soft Shutter Release Button on your Fujifilm camera. Guess what? you can have a fancy Pc sync terminal cap too. Made of wood and metal. Looks too good.

And more:

  • dc-watch – Square hood for XF23mmF2 and XF35mmF2
  • joengphotography – NITECORE NP-W235 Battery & Charger Review
  • New Patona Fuji NP-W126s batteries called “Protect” are now available at AmazonDE here. Main feature is overheating protection. In the header it also says “without restriction of use” that hopefully eliminates the annoying refusal of older Patona models in the new Fuji cameras.
  • By Henry – Found a New Fujifilm X-Pro3 Arca Swiss plate that will not interfere either the display. This plate a provides me full access to the fold down display even when mounted on a tripod. I looked all over for on that would and not risk damage to the display and this one works even while mounted on a tripod. Check out hejnarphotostore.com.
  • domvarney – Fuji NP-W235 Battery… Making sense of the numbers

Share

**This post contains affiliate links and I will be compensated if you make a purchase after clicking through my links.

As an Amazon Associate I earn from qualifying purchases