Skip to content

New firmware for X-T1, X-E2, X-PRO1, X-E1 adds 18-135 compatibility and more. XQ1, X-A1 and X-M1 get direct Instax Printer support

Share

 photo ttt_zps5e830ba8.jpg

It’s Kaizen again!  Today you can download the new firmware for X-T1, X-E2, X-PRO1, XQ1, X-A1 and X-M1 from Fuji’s support site here.

X-T1 firmware ver. 1.10

  • 1. Addition of compatibility with “XF18-135mmF3.5-5.6 R LM OIS WR” – To ensure that autofocus performs as expected, upgrade the firmware for the camera.
  • 2. Improvement of “Exposure compensation/exposure indicator” in EVF – Values are added to the scales of the indicator for better visibility.
  • 3. Improvement of Movie-record button operability – To avoid an accidental movie shooting, the delayed time will become longer between the moment you press the button and a movie shooting starts or ends.
  • 4. The phenomenon is fixed that images are not recorded with the set interval when “INTERVAL” in “INTERVAL TIMER SHOOTING” is set to 5 sec or less. In this case, the setting of “IMAGE DISP.” in “SCREEN SET-UP” will change to “OFF” automatically.

X-E2 firmware ver. 2.10

  • 1. Addition of compatibility with “XF18-135mmF3.5-5.6 R LM OIS WR” – To ensure that autofocus performs as expected, upgrade the firmware for the camera.
  • 2. Change of aperture display for zoom lenses – Display of aperture value when zooming with the shutter button pressed halfway will become same as the display when zooming without the shutter button pressed.

X-PRO1 firmware ver. 3.30

  • 1. Addition of compatibility with “XF18-135mmF3.5-5.6 R LM OIS WR” – To ensure that autofocus performs as expected, upgrade the firmware for the camera.
  • 2. Change of aperture display for zoom lenses – Display of aperture value when zooming with the shutter button pressed halfway will become same as the display when zooming without the shutter button pressed.

X-E1 firmware ver.2.30

  • 1. Addition of compatibility with “XF18-135mmF3.5-5.6 R LM OIS WR” – To ensure that autofocus performs as expected, upgrade the firmware for the camera.
  • 2. Change of aperture display for zoom lenses – Display of aperture value when zooming with the shutter button pressed halfway will become same as the display when zooming without the shutter button pressed.

_ _ _

Some fixes and improvements also for the X-M1, X-A1 and XQ1. And if you own the [shoplink 23847]Instax Share SP-1 printer[/shoplink], you can now send images directly via WiFi to this little printer without having to send it first to your iPhone. If you own the best sellers in the X-lineup, X-T1 and the X-E2, then you still have to continue to upload your images to your smartphone first and from there send it to the printer.

X-M1 ver. 1.20 / X-A1 ver. 1.20

  • 1. Addition of compatibility with “instax SHARE SP-1” – Images can be directly transferred to the “SP-1” from a camera and then printed.
  • 2. Addition of compatibility with “XF18-135mmF3.5-5.6 R LM OIS WR” – To ensure that autofocus performs as expected, upgrade the firmware for the camera.
  • 3. Change of aperture display for zoom lenses – Display of aperture value when zooming with the shutter button pressed halfway will become same as the display when zooming without the shutter button pressed.
  • 4. Improvement of recorded sound – Sound quality of a movie shooting is improved.
  • 5. The phenomenon is fixed that in rare cases, gray stripes could appear in highlight portion of images with a standard viewer of a smartphone (only Android).

XQ1 ver. 1.20

  • 1. Addition of compatibility with “instax SHARE SP-1” – Images can be directly transferred to the “SP-1” from a camera and then printed.
  • 2. The phenomenon is fixed that in rare cases, a camera could stop working during image transfer when starting “PC AutoSave” function by pressing the Wi-Fi button.

And now, lucky XQ1, X-A1 and X-M1 shooters, download the firmware at Fuji’s download site here (X-M1 / X-A1 / XQ1)

Instax Share SP-1 printer: [shopcountry 23847]

Share